ASTM A709 is the standard specification for plates, bars, and shapes used for structural steel bridges and applies to Carbon HSLA (High Strength Low Alloy), Q&T (Quench & Tempered), and stainless-steel metals. ASTM A709 grades 36,50,70, and 100 include designations for enhanced atmospheric corrosion resistance (W). As a non-fracture critical steel, ASTM A709 is designed to meet impact requirements in both fracture critical tension components and non-critical fracture tension components. These standards are based on American Association of State Highway and Transportation Officials (AASHTO) requirements for tension components in bridges. Metals USA carries a robust inventory of ASTM A709 grade 50 material which is commonly used in high-rise buildings, bridges, oil rigs, wind farms, and anywhere greater strength, structural efficiency, and optimum corrosion resistance are required.
Yield/Tensile Strength
Metric | Imperial | |
Tensile Strength | 485 MPa | 65 ksi |
Yield Strength | 345 MPa | 50 ksi |
Elongation 200mm/8" | 18 | 18 |
Elongation 50mm/2" | 21 | 21 |
Material Chemistry
C | MN | P | S | SI | NI | CR | CU | V |
0.19% Max | 0.80 - 1.25% | 0.030% Max | 0.030% Max | 0.30 - 0.65% | 0.40% Max | 0.40 - 0.65% | 0.25 - 0.40% | 0.02 - 0.10% |